Renault Duster
Air filter: 250–360 rubles, cabin: 220–370 rubles, fuel: 290–380 rubles. Air filter: 250–360 rubles, cabin: 220–370 rubles, fuel: 290–380 rubles. Air filter: 250–360 rubles, cabin: 220–370 rubles, fuel: 290–380 rubles.
Replacing the fuel filter
On vehicles with engines 1.6 and 2.0, fuel modules with an integrated fuel filter are installed, the replacement of which is not provided by the manufacturer. In addition, the Duster 2.0 modification also has a fuel filter in the engine compartment (on the right side), the maintenance regulations require it to be updated every 120 thousand kilometers. In its dismantling and installation, we will practice. The fuel in the power system is under pressure, which must be relieved before starting work.
one
To do this, set the rear seat cushion in an upright position For this, set the rear seat cushion in an upright position
2
Raise the fuel filler flap. Raise the fuel filler cap. Raise the fuel filler cap.
3
With a slotted screwdriver, we squeeze the lock of the wire block … With a slotted screwdriver, we squeeze the lock of the wire block … With a slotted screwdriver, we squeeze the lock of the wire block …
four
… and disconnect the connector from the fuel module cap connector … and disconnect the connector from the fuel module cap connector … and disconnect the connector from the fuel module cap
We start the engine and let it idle to a stop due to fuel exhaustion. Then we turn on the starter for 2-3 seconds. After that, the pressure in the fuel system will be relieved.
five
Using a screwdriver to press the tube tip retainer … By pressing a screwdriver on the tube tip retainer … By pressing a screwdriver on the tube tip retainer
6
… remove the tip of the discharge pipe from the filter nozzle … remove the tip of the discharge pipe from the filter nozzle … remove the tip of the discharge pipe from the filter nozzle
7
Similarly, remove the tip of the supply pipe from the filter nozzle. Similarly remove the tip of the supply pipe from the filter nozzle. Similarly remove the tip of the supply pipe from the filter nozzle.
eight
With the “10” head weaken the tightening of the bolt of the filter mounting clamp. With the “10” head weaken the tightening of the bolt of the filter mounting clamp. With the “10” head weaken the tightening of the bolt of the filter mounting clamp.
9
We take out the filter from the clamp We take out the filter from the clamp We take out the filter from the clamp
Since fuel remains in the filter, we pour it into a previously prepared container. We install a new fuel filter in the reverse order.
ten
In this case, the arrow on the filter housing should be directed in the direction of travel of the fuel (towards the rear of the car). In this case, the arrow on the filter housing should be directed in the direction of travel of the fuel (towards the rear of the car). In this case, the arrow on the filter housing should be directed in the direction of travel of the fuel (towards the rear of the car).
On a note
Oleg Getmanenko, editor:
- When working with elements of the fuel system, do not forget about fire safety measures! Do not smoke, do not approach an open fire machine. Do not change the filter in rooms with natural gas appliances.
Replacing the air filter element
The replaceable air filter element needs to be replaced every 15 thousand kilometers. When operating a vehicle in a dusty area, the interval should be reduced by half. A deformed or damaged element is replaced regardless of mileage. The operation procedure is illustrated on the Renault Duster 2.0 modification; on a car with a 1.6 engine, we replace the exchangeable element in the same way.
one
Disconnect the rubber clamp of the air cavity resonator mount Disconnect the rubber clamp of the air cavity resonator mount Disconnect the rubber clamp of the air cavity resonator
2
Disconnect the resonator pipe from the pipe cover of the air filter housing Disconnect the pipe resonator from the pipe cover of the air filter cover Disconnect the resonator pipe from the pipe cover of the air filter housing
3
Squeezing two clamps of the tube tip, disconnect the tube of the vacuum amplifier from the nozzle of the receiver Squeezing two clamps of the tip of the tube, disconnect the tube of the vacuum amplifier from the nozzle of the receiver
four
Using a Torx T-25 wrench, unscrew the two screws securing the cover to the air filter housing. Using a Torx T-25 wrench, unscrew the two screws securing the cover to the air filter housing. Using a Torx T-25 key, unscrew the two screws securing the cover to the air filter housing.
five
Putting the air path resonator aside, remove the air filter housing cover with a replaceable element. Putting the air path resonator aside, remove the air filter housing cover with a replaceable element. Putting the air path resonator aside, remove the air filter housing cover with a replaceable element
6
We take out a replaceable element from a cover We take out a replaceable element from a cover We take out a replaceable element from a cover
We clean the cavity of the air filter cover and install the new element in the reverse order.
Cabin Filter Replacement
The replacement filter for the cabin filter is the same as for the replacement air filter element. It is located under the dashboard, to the left of the glove compartment.
one
Use your finger to press the filter retainer (for clarity, shown on the removed filter) … Use your finger on the filter retainer (for clarity, shown on the removed filter) … Use your finger on the filter retainer (shown for illustrative purposes on the removed filter) …
2
… and we take out the bottom edge of the filter from the heater body … and we take out the bottom edge of the filter from the heater body … and we take out the bottom edge of the filter from the heater body
3
Pressing the finger down, at the same time pushing the filter out of the heater case … Pressing the finger down, at the same time pushing the filter out of the heater case … Pressing the finger down, at the same time pushing the filter out of the heater case …
four
… and remove it … and remove it … and remove it
five
Install a new cabin filter in reverse order Install a new cabin filter in reverse sequence Install a new cabin filter in reverse sequence
