201006031548_66547
You cannot go far on a flat tire - if you are unlucky, you will have to repair the tire. The cheapest way to patch a puncture with your own hands. There are two popular ways: pour special sealant through the nipple hole (110–210 rubles per cylinder) or apply a tourniquet from the tire medicine cabinet (120–175 rubles per set). In both cases, the wheel can not be removed, but you will have to work squatting or lying down.
Professionals work differently: no one will mess with the grimy wheel right on the machine. It is not surprising that the list of services everywhere opens the operation "removal-installation". In Moscow and St. Petersburg, the pleasure of watching her will cost 70–270, in smaller cities –– 30–100 rubles. Both forks were not formed because of the greed of servicemen. Simply, the cost of work is tied to the landing diameter of the tire: the larger it is, the more expensive the process. (In this review, we limited ourselves to the most running sizes - from 13 to 20 inches.)
About the same amount will have to pay for the assembly-disassembly. Balancing is a little more expensive: 100-300 rubles in megacities and 50-120 in other cities. Mounted weights - from 10 rubles apiece, self-adhesive - about 30 rubles.
Do not refuse to replace the valve. After all, it’s not at all expensive (30-50 rubles) that a part can be dismantled and installed only on a bare rim - if anything, the entire tire assembly will have to be repeated from scratch. And the new, it is the new - it’s calmer with it.
As for the prices for washing wheels, artisans do not agree. In order to avoid the charge of imposing a service that is not obvious to some consumers, some, putting a zero or a dash in the corresponding box, “smear” the cost along the entire technological chain, while others, adding nothing, indicate a fixed rate: the national average is 30-50 rubles.
vulkanizaciya
Interconnected processes (remove, wash, disassemble, assemble, balance and deliver) are often combined into complexes. By ordering such a service, you can save 10-15%.
About margins. 30-40 rubles for each operation will have to pay extra for owners of tires with a reinforced sidewall, low-profile models and versions of Run Flat. The whim to fill the wheels with nitrogen will cost a considerable 50 rubles apiece - five times more expensive than free air, which is 78% of this gas itself. You can’t do anything - an exclusive, although useless, requires generosity.
The cost of repair depends on the degree of damage to the tire. Elimination of the usual puncture of the master is estimated at 150-300 rubles, a side cut - at 500-1000. Hopelessly spoiled tire is readily disposed of - at your expense, of course. The price of the service is low, 25 rubles per wheel. In both capitals, more will be removed from the client - from 50 to 100.