If, for example, sand or boxes are not very demanding on the conditions of transportation, then a motorcycle or a boat is a delicate cargo, you can’t carry them in bulk. On the other hand, it’s expensive and troublesome to buy specialized trailers for them: taxes, technical inspections, insurance, and parking lots aren’t enough. So, choose the lesser of two evils? Not at all necessary - the Trailer Stupa plant offers the 82942T model, which successfully combines the advantages of a station wagon with the specifics of transporting small-sized vehicles.
The versatility of the new trailer lies in the thoughtful configuration of its special equipment. A lodgement is intended for transporting a boat, aquabike or small boat - a spatial farm with longitudinal bars upholstered with soft carpet. They can be adjusted to any contours of the bottom of the vessel, and the entire structure is installed in the body in a few minutes by one person.Single leaf springs and shock absorbers provide the cargo with a comfortable journey. Single leaf springs and shock absorbers provide the cargo with a comfortable journey.
Launching the vessel into the water is also not a problem - the trailer wheel hubs are tight, the platform deck is made of waterproof plywood, so it can be fed directly into the water without fear. Also loading takes place out of the water - the craft is pulled onto the tool holders with a winch or hands. To make it easier to lower and raise the boat or jet ski, it is advisable to mount the trailer platform as low as possible. Stupinsky can be forgiven for the flaw - he is universal. The taillights are most vulnerable when bathing the trailer. They are leaky, therefore, if loading and unloading will be predominantly from water, they should be sealed or made easily removable.
Outside on the bottom of the body there are bump arcs. They and wings protect during maneuvers. and serve as a fastener for cargo stretch marks.The kit for transporting a motorcycle has an entry ladder. The kit for transporting a motorcycle has an entry ladder.
For transporting a motorcycle, a gutter is fixed on the platform, and in the front part there is a bracket for fixing the front wheel. They roll a motorcycle manually along the ladder (it is included) or with a certain skill under its own power. The motorcycle is fixed for the side arches - with ratchet winches.
For the ATV, two ladders are needed, as a second, a removable trough is used. The front wheel retainer must be removed.The second ladder for loading the “quadric” is a removable central trough. The second ladder for loading the “quadric” is a removable central trough.
Among the design features of the base trailer, we note the suspension on soft single-leaf springs with shock absorbers, a fully galvanized body (hot tinning), wheels of 13 or 16 inches to choose from. A folding drawbar allows you to store the trailer vertically even in a small garage.